When is it suitable to use a dual head for water jet cutting machine?

When a certain material is processed into a certain product, it is often used in the process of cutting, and there are many cutting tools available in this process. The dual waterjet cutting head is one of them. However, not all working conditions need to use such equipment. In order to reduce unnecessary waste, careful matching is required.

If the milling method will produce a lot of waste, then we can consider using the double cutter head water cutting machine, because it will not produce waste, but also cut the whole piece, so that most of the materials cut by the water cutter are available.

If the circular saw and band saw are too slow to perform non-linear cutting, or the thickness that can be cut by laser and plasma is too thin, the burr generated is too large, and the heat affected zone is unfavorable, the double blade water cutting machine can be considered.

In addition, if you don't want to produce toxic gas when cutting again, do not need secondary processing, and do not want to produce thermal effect or deformation or micro cracks, the use of double blade water cutting machine is a good choice. In addition, when cutting inflammable and explosive materials or cutting in inflammable and explosive environment, it is more necessary to consider the use of dual water jet cutting head.

Generally speaking, in the face of different materials, the hardness and other properties are different, in order to cut efficiency and quality, or to meet some other cutting needs, we need to select professional corresponding cutting machines.